高额定电压小电压电流疲劳测试仪（耐电弧焊接疲劳测试仪）-（确定机把控）

High voltage low current tester (arc resistance tester) - (computer control)

品牌英文名称：耐电弧试验机

Product name: electric arc resistance tester

类产品材质：NDH-A

Product model: NDH - A

充分考虑的标准：GB/T 1411-2002《固态电绝缘装修材料耐高压得很低的工作电流电弧电流电流的耐压》（同等IEC  61621-1997）及ASTM D495等规格的标准规划制造技术的，并合适IEC 149、UL 746A等试验报告做法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

关键采用的范围及用途：

本试验报告机是根据技术应在电机的、机械和家里用的机械等制造业的低压电工用塑胶板材、聚酯光敏树脂胶和电耐压漆等电耐压的原村料的耐脉冲能划分，主在粉末状电耐压的原村料如：塑胶板材、聚酰亚胺膜、聚酯光敏树脂、矿石、陶瓷图片、钢化玻璃、电耐压油、电耐压漆、瓦楞纸板等导电介质的耐脉冲能测试英文；

本检验机由算机调控自动运行，应该彰显特定科学试验的状态及科学试验的时间，科学试验尾声后并同步保存特定科学试验数据显示，并可打印文件.标准规范科学试验汇报。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 远程服务器为下上一梯框架，中下部为操控软件系统，上面为检测箱。

2 本服务利用*新智能化把控好技木，借助选用应用程序（IEC或ASTM）可自己参与试验检测，并在PC上体现测试操作过程和数据。

3 **使用性能稳定，抗干拢意识强，测试测试计算精度更高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 弧光通断时光出现偏差的原因：不大于 ±10ms

2 调压器储电量：2kVA

3 額定冲击试验额定电压：12.5kV

4 做实验的时候电压电流精确：±3%

5 感应电流调整高精准度：±10%  感应电流校正精度等级：1.5%

6 工业对试件材料压强：（0.5±0.05）N

7 工业的原材料：钨棒

8 电级差距：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 便用情况温：（23±2）℃

10 用到大环境含水率：（50±5）%

11 电源适配器：220V±5%  50Hz  10A

12 检测    形式：   执行标准/美标/10 mA 间隔/20 mA 连续式/30 mA陆续/40 mA不断

13 耐压执行程序下面：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 产品设备机型：

NDH-A    耐电弧焊接试验报告仪-微机调节

NDH-B    耐脉冲实验仪-触碰屏管控

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！